Article List

• Introduction To The Six Basic Characteristics of Modified Flame-retardant PP

  The six basic characteristics of flame retardant PP:1. Mechanical properties 2. Physical performance 3. Chemical stability 4. Thermal performance 5. Weathering resistance 6. Electrical performance

  Material Introduction May 09, 2024
• How To Configure A Twin Screw Extruder

  When we really want the additive to be evenly distributed throughout the polymer matrix, we would claim that we need to improve dispersion. Or we design the screw to have a distribution mixing element, but the material is easy to agglomerate and needs to be dispersed first before being distributed.

  Products Release May 06, 2024
• The Correct Disassembly Method for Twin-screw Extruder Screws

  The screw of the parallel twin screw extruder in the same direction is designed based on the principle of integration, and can be replaced and combined according to different material needs. When disassembling the screw, the material inside the main machine should be drained as much as possible (if the material is high viscosity plastic such as PC or medium viscosity plastic such as ABS and POM, PP or PE material can be added to clean the chamber before parking). Then, the main machine and various auxiliary machines should be stopped, and each section of the electric heater can still maintain normal operation. Then, the screw should be replaced according to the following steps.

  Products Release May 02, 2024
• Elements in The Design of Plastic Modification Formulas

  Plastic modification is a method of improving the quality of plastics by adding additives, fillers, etc. to alter their properties. Meanwhile, plastic modification is also the most effective way to reduce the cost of plastics. The elements of formula design in plastic modification mainly include material selection, compounding, dosage, and mixing method. The interaction between various elements can be either mutual assistance or mutual cancellation. Therefore, designing a high-performance, easy to process, and low-cost formula is not an easy task.

  Material Introduction April 29, 2024
• What Are The Difficulties That Need To Be Faced in The Manufacture of Glass Fiber Reinforced Nylon?

  Nylon (PA) has a series of excellent properties such as high mechanical strength, chemical resistance, oil resistance, wear resistance, self-lubricating, and easy processing and molding, and has become one of the widely used thermoplastic engineering plastics both domestically and internationally.

  Material Introduction April 25, 2024
• Application of 6 Varieties of Thermoplastic Elastomers

  Thermoplastic elastomers, abbreviated as TPE or TPR, are also referred to by many as SBS, a specific type of elastomer. But in reality, there is no unified name for thermoplastic elastomers both domestically and internationally, and most of the time they are represented by the English abbreviation TPE.

  Material Introduction April 22, 2024
• Detailed Explanation of Raw And Auxiliary Materials for PVC Formulation

  PVC needs to add additives in processing in order to produce various products that meet people's needs, such as soft, hard, transparent, good electrical insulation, foaming, etc. When selecting the variety and dosage of additives, it is necessary to comprehensively consider various factors, such as physical and chemical properties, flowability, and formability, in order to ultimately establish an ideal formula.

  Products Release April 18, 2024
• Analysis of Coupling And Off Axis Protection Device for Twin Screw Granulator

  Coupling is an important connecting device between the main motor of the extruder and the gearbox. Currently, nylon rod couplings and safety couplings are commonly used on the market. Nylon rod couplings have a simple mechanical structure and low cost, but the torque is not accurate. They rely entirely on the shear force of the torque greater than that of the nylon rod. When the nylon rod is cut off, it needs to be reattached.

  Products Release April 15, 2024
• Classification And Analysis of Thermoplastic Elastomers

  Thermoplastic elastomer is an environmentally friendly low-carbon composite material that possesses the characteristics of rubber (high elasticity, compression permanent deformation, etc.), as well as the processing characteristics of plastic (simple process). In most regions, the abbreviation TPE is commonly used to refer to thermoplastic elastomers. Another theory is that TPE is the general term for thermoplastic elastomers, TPU is thermoplastic polyurethane, TPV vulcanized thermoplastic elastomers, and TPR is generally considered as shoe sole material in China.

  Material Introduction April 11, 2024
• Application of Modified Plastics in Automobiles under The Background of Lightweight

  1 Overview of modified plastics for vehicles; 2 Automotive use and modification of PP; 3 Automotive use and modification of PA; 4 Automotive use and modification of ABS; 5 Vehicle use and modification of other plastics; 6 Conclusion

  Material Introduction April 08, 2024