PE has excellent mechanical processing performance, but its surface is inert and non-polar, resulting in poor printability, dyeing, hydrophilicity, adhesion, anti-static performance, and compatibility with other polar polymers and inorganic fillers. In addition, its wear resistance, chemical resistance, environmental stress cracking resistance, and heat resistance are poor, limiting its application range. Modification is needed to improve its performance and expand its application field.

Share several commonly used plastic modification formulas 01 Universal Thermoplastic Reinforcement Formula 02 Engineering plastic reinforcement formula 03 Thermosetting plastic reinforcement formula 04 Other plastic reinforcement formulas

Plastic modification refers to the process of improving or improving the original properties of resins through physical, chemical, mechanical, and other means. Modified plastics are collectively referred to as "modified plastics".

Plastic modification formula is very important when choosing plastic additives. How to obtain a formula with higher performance, low cost and easy processing will introduce the selection of additives from the following six aspects.

Gloss is an important appearance attribute of plastics, and it is an important indicator to test the appearance quality of plastics. However, in the production process, due to the influence of raw materials, injection molds, injection molding processes, etc., it is very easy to have inconsistent gloss between batches. In order to effectively control the appearance quality of plastics and improve the gloss of plastics, it is necessary to understand the factors affecting the gloss of plastics.

1. Improve some physical and mechanical properties of plastics and expand the scope of application 2. Improve melt fluidity and improve molding performance 3. Endow plastic with some special properties to prepare new plastic alloy materials 4. Reduce the cost of materials and improve economic benefits 5. Recycling waste polymer materials to reduce environmental pollution

Add Crystallization nucleating agent In the process of PET crystallization to increase crystallization rate

The modified plastics are plastic products with specific properties processed or modified by physical, chemical or mechanical methods to improve the properties of the resins in terms of flame retardancy, aging resistance, mechanical properties and electrical, magnetic, optical and thermal properties

antistatic automotive PP materials have become one of the important directions in the field of plastic modification.

Main subdivision categories, consumer groups and market application of modified plastics.