Article List

• Structural Features of Co-rotating Twin-screw Extruder

  The most notable feature of the co-rotating twin-screw extruder is that both the screw and barrel adopt a "building block" design. By combining various threaded elements, the co-rotating twin-screw extruder has the functions of feeding, melting, mixing, exhausting, pressure holding and conveying, realizing various process such as material conveying, plasticizing, shearing, exhausting, pressure holding and extrusion.

  Products Release July 15, 2024
• How To Prolong The Service Life of Twin Screw Granulator

  Prolonging the service life of the twin screw granulator requires attention to some key aspects, including correct operation, regular maintenance and proper care. Here are some suggestions:1. Correct operation 2. Regular maintenance 3. Cleaning and lubrication 4. Temperature control 5. Avoid no-load operation 6. Repair faults promptly 7. Regularly check the electrical system 8. Staff training 9. Check the cooling system regularly 10. Purchase high-quality raw materials

  Products Release July 11, 2024
• Application of Titanium Dioxide in Masterbatch

  Masterbatch can be used to color PVC, polyethylene, polypropylene, polystyrene and ABS plastics. Its main ingredients are pigments, resins, dispersants, volume pigments, fluorescent whitening agents, antioxidants, anti-UV agents, antistatic agents, toughening agents, brighteners, etc. Titanium dioxide is used as a white pigment and has the advantages of non-toxic, stable chemical properties, high hiding power and good dispersion.

  Material Introduction July 08, 2024
• Classification of Recycled PE And Its Diversified Uses After Modification

  Classification of recycled PE and its diversified uses after modification Main classification of recycled PE Modified types of recycled PE Uses of recycled modified PE

  Products Release July 04, 2024
• Four Ways To Clean Twin Screw Extruder Screws

  As the workhorse in the field of compounding, the twin-screw extruder's superior performance and customizability are its advantageous features in this position. It can combine different additives and fillers to achieve different particle shapes and properties with different properties. While a variety of additives and fillers can be processed for extrusion, some methods of obtaining these products can also lead to contamination problems and low flow or low pressure in many areas throughout the barrel.

  Products Release July 01, 2024
• The Small TPE Foot Pad Has So Many Details

  Compared to the traditional leather large-surround foot pads that use splicing and synthesis production processes, TPE foot pads can be molded in one mold, eliminating the use of additives such as glue, so that the foot pad material is not affected by foreign objects, so there is no odor and no irritation to the human body.TPE also has a good waterproof effect and can be directly washed with water for easier care.

  Material Introduction June 27, 2024
• Is The Die Hole Blocked Again? Whether It Is Stopping The Machine Or Changing Materials, These Six Solutions Are Worth A Look！

  The template of the extruder consists of a template body with a discharge hole and a heat insulation layer, and is fixed to the die head with a threaded rod. Only when the discharge speed of each die hole is consistent can particles of uniform size be cut out. During use, there are many factors that affect the smooth flow of the template. When the template is severely blocked, it will affect the appearance of the particles, the service life of the cutter, and cause shutdown.

  Products Release June 24, 2024
• Key Elements for Creating High-quality TPE

  With the rapid development of the economy, human awareness of environmental protection and product requirements have been continuously improved. TPE (Thermoplastic Elastomer) is a material with high elasticity, high strength, high resilience of rubber, and can be injection molded. It is non-toxic and environmentally friendly, has excellent colorability, weather resistance and temperature resistance, and has excellent processing performance. It can be recycled and coated and bonded with base materials such as PP, PC, PS, ABS, etc., or it can be molded alone. TPE has both the processing performance of thermoplastics and the physical properties of vulcanized rubber. It is an advantageous combination of the advantages of plastics and rubber. Providing customers with a TPE material formula with low price, high yield rate, and excellent performance has always been the core pursuit of TPE granulation manufacturers.

  Material Introduction June 20, 2024
• Elastomer Granulator Production Process And Flow

  Elastomer granulator production process and flow Using styrene block copolymers (SBS, SEBS, SEPS, SIS, etc.) as the basic material, supplemented with other polymers, fillers and processing aids Thermoplastic elastomer blends

  Products Release June 17, 2024
• Factors Affecting The Mixing Process of Kneader Machine

  Process parameters that affect mixing in the kneader: 1: Filling coefficient and feeding materials 2: Mixing procedure and feeding sequence 3: Mixing temperature 4: Mixing time 5: Rotor speed

  Products Release June 13, 2024