What does a plastic granulator contain?

plastic granulators are mechanical devices that cut plastic raw materials into small pieces to produce plastic products. It uses a rotating knife to cut the plastic, and an extruder to compress the cut plastic into small pieces. The granulator equipment must be operated to achieve its operation.

• What should I pay attention to before using plastic granulators?

• What does a plastic granulator contain?

• What is the accessories for plastic granulators?

What should I pay attention to before using plastic granulators?

Turn on the current, set the temperature, and make sure that the heating is normal.

Clean the hopper and other units, inlet and outlet pipes, and check the oil level and lubrication status of each transmission oil, engine oil and high temperature butter. The transmission oil of the new machine should be replaced at least every six months, and the moving parts should be refilled at least once a week. Lubricating oil.

When the temperature approaches the set temperature, prepare the material and start the main motor in turn.

⒋The temperature of the plastic granulator must reach the set temperature, and the feeding device can be switched on to pour the cleaning material or raw material to clean the residue in the screw until the new material is extruded, and then stop the extrusion and quickly install the filter plate and nozzle head. Only then can the spray head be closed. After closing the nozzle head, turn on the main screw motor of the mill. The operator should stay away from the nozzle head at this time to prevent the nozzle head from blocking and bursting and hurting people until the nozzle head extrudes the silk material and then closes it. Cover the pellet and connect it with knife holder and lock.

What does a plastic granulator contain?

The complete set of plastic granulator equipment is a special equipment for producing plastic granulates. It includes a main machine for processing plastic sheets into pellets and a number of supporting devices. The main machine of the plastic granulator includes pre-processing part, main processing part and post-processing part. The pre-processing part is responsible for bringing the raw materials into a state suitable for entry into the main processing part; the main processing is responsible for the further processing of raw materials for the production of granules; post-processing is responsible for cleaning, drying and packaging the granules.

What is the accessories for plastic granulators?

In addition to the main machine, the complete set of plastic granulator equipment also includes some supporting equipments such as fans, gas atomizers, cooling water circulation pumps, vacuum pumps and transformers. The fan is used to ensure the airflow inside the machine; the gas atomizer is used to atomize the gas into small water droplets so that the particles can be sufficiently cooled; the cooling water circulation pump is used to circulate the cooling water to different parts; the vacuum pump is used to maintain the vacuum during the production process; the transformer current can be reduced to the required level.

Nanjing Haisi Extrusion Equipment Co., Ltd. has been a Chinese pioneer in the field of plastic granulators for several years. You can supply any kind of plastic granulators you need. At the same time, their after-sales service is also very considerate.