Products Release

• Comparative Advantages of Plastic Twin-screw Extruders And Single-screw Extruders

  The specific structure of plastic twin-screw extruders is based on the actual twin-screw extruders, and specially designed twin-screw extruders can be divided into meshing types and non-meshing types according to the relative positions of the two screws. Plastic twin-screw extruders can arrange and combine thread elements and barrel elements of various geometric shapes. Based on experience-theory-practice-test, the design can be optimized for different mixing requirements to adapt to the needs of different process formulas, making the co-rotating twin-screw extruder highly adaptable.

  Products Release May 20, 2024
• How To Maintain The Plastic Pelletizer?

  As an environmentally friendly mechanical production equipment, plastic pelletizers produce useful granular plastics, but for these plastic production machinery and equipment, necessary maintenance is still required, especially in daily life. Some maintenance before and after production can maintain the normal operation of the equipment and extend its service life, which is also very good for users.

  Products Release May 16, 2024
• Application Classification And Characteristics of Plastic Recycling Pelletizer

  Application Classification and Characteristics of Plastic Recycling Pelletizer Crushed material recycling and granulation production line: Film material two-stage single-screw granulation production line: Nylon waste filament and fishing net single screw recycling and pelletizing production line:

  Products Release May 13, 2024
• How To Configure A Twin Screw Extruder

  When we really want the additive to be evenly distributed throughout the polymer matrix, we would claim that we need to improve dispersion. Or we design the screw to have a distribution mixing element, but the material is easy to agglomerate and needs to be dispersed first before being distributed.

  Products Release May 06, 2024
• The Correct Disassembly Method for Twin-screw Extruder Screws

  The screw of the parallel twin screw extruder in the same direction is designed based on the principle of integration, and can be replaced and combined according to different material needs. When disassembling the screw, the material inside the main machine should be drained as much as possible (if the material is high viscosity plastic such as PC or medium viscosity plastic such as ABS and POM, PP or PE material can be added to clean the chamber before parking). Then, the main machine and various auxiliary machines should be stopped, and each section of the electric heater can still maintain normal operation. Then, the screw should be replaced according to the following steps.

  Products Release May 02, 2024
• Detailed Explanation of Raw And Auxiliary Materials for PVC Formulation

  PVC needs to add additives in processing in order to produce various products that meet people's needs, such as soft, hard, transparent, good electrical insulation, foaming, etc. When selecting the variety and dosage of additives, it is necessary to comprehensively consider various factors, such as physical and chemical properties, flowability, and formability, in order to ultimately establish an ideal formula.

  Products Release April 18, 2024
• Analysis of Coupling And Off Axis Protection Device for Twin Screw Granulator

  Coupling is an important connecting device between the main motor of the extruder and the gearbox. Currently, nylon rod couplings and safety couplings are commonly used on the market. Nylon rod couplings have a simple mechanical structure and low cost, but the torque is not accurate. They rely entirely on the shear force of the torque greater than that of the nylon rod. When the nylon rod is cut off, it needs to be reattached.

  Products Release April 15, 2024
• Modified Plastics Used in Car Lights

  The main components of automobile lights are composed of reflectors, lenses, casings, light sources, electronic circuits, and installation accessories. With the development trend of lightweight automobiles, the proportion of plastics in automobiles is getting higher and higher.

  Products Release April 04, 2024
• What Are The Differences in Injection Molding of Different Modified Nylon

  With the development of industries such as automobiles, machinery, electronics, and aerospace, the requirements for material properties are becoming increasingly high. Developing high-performance and multifunctional modified nylon (PA) special materials has become a major research and development topic.

  Products Release April 01, 2024
• Five Common Problems And Solutions in Plastic Granulation

  Five common problems and solutions in plastic granulation 01 Black Dots 02 Broken Bar 03 Hollow 04 Material Overflow 05 Bridge Construction

  Products Release March 28, 2024