Product News

• Four Ways To Clean Twin Screw Extruder Screws

  As the workhorse in the field of compounding, the twin-screw extruder's superior performance and customizability are its advantageous features in this position. It can combine different additives and fillers to achieve different particle shapes and properties with different properties. While a variety of additives and fillers can be processed for extrusion, some methods of obtaining these products can also lead to contamination problems and low flow or low pressure in many areas throughout the barrel.

  Products Release July 01, 2024
• The Small TPE Foot Pad Has So Many Details

  Compared to the traditional leather large-surround foot pads that use splicing and synthesis production processes, TPE foot pads can be molded in one mold, eliminating the use of additives such as glue, so that the foot pad material is not affected by foreign objects, so there is no odor and no irritation to the human body.TPE also has a good waterproof effect and can be directly washed with water for easier care.

  Material Introduction June 27, 2024
• Is The Die Hole Blocked Again? Whether It Is Stopping The Machine Or Changing Materials, These Six Solutions Are Worth A Look！

  The template of the extruder consists of a template body with a discharge hole and a heat insulation layer, and is fixed to the die head with a threaded rod. Only when the discharge speed of each die hole is consistent can particles of uniform size be cut out. During use, there are many factors that affect the smooth flow of the template. When the template is severely blocked, it will affect the appearance of the particles, the service life of the cutter, and cause shutdown.

  Products Release June 24, 2024
• Key Elements for Creating High-quality TPE

  With the rapid development of the economy, human awareness of environmental protection and product requirements have been continuously improved. TPE (Thermoplastic Elastomer) is a material with high elasticity, high strength, high resilience of rubber, and can be injection molded. It is non-toxic and environmentally friendly, has excellent colorability, weather resistance and temperature resistance, and has excellent processing performance. It can be recycled and coated and bonded with base materials such as PP, PC, PS, ABS, etc., or it can be molded alone. TPE has both the processing performance of thermoplastics and the physical properties of vulcanized rubber. It is an advantageous combination of the advantages of plastics and rubber. Providing customers with a TPE material formula with low price, high yield rate, and excellent performance has always been the core pursuit of TPE granulation manufacturers.

  Material Introduction June 20, 2024
• Elastomer Granulator Production Process And Flow

  Elastomer granulator production process and flow Using styrene block copolymers (SBS, SEBS, SEPS, SIS, etc.) as the basic material, supplemented with other polymers, fillers and processing aids Thermoplastic elastomer blends

  Products Release June 17, 2024
• Factors Affecting The Mixing Process of Kneader Machine

  Process parameters that affect mixing in the kneader: 1: Filling coefficient and feeding materials 2: Mixing procedure and feeding sequence 3: Mixing temperature 4: Mixing time 5: Rotor speed

  Products Release June 13, 2024
• The Difference between Conical Twin Screw Extruder And Parallel Twin Screw Extruder

  According to whether the axis lines of the twin screws are parallel or not, they can be divided into two types of extruders: those with parallel axis lines and those with intersecting axis lines. The one with parallel axis lines is a parallel twin screw extruder, and the one with intersecting axis lines is a conical twin screw extruder.

  Products Release June 11, 2024
• Introduction To The Segmentation of The Extruder Screw

  When the material moves forward along the screw, it experiences changes in temperature, pressure, viscosity, etc. This change is not the same throughout the entire length of the screw. According to the changing characteristics of the material, the screw can be divided into a feeding section, a compression section and a homoge0nization section.

  Products Release June 06, 2024
• All-round Application of TPU in Sports Shoes: Upper, Midsole, Outsole

  TPU has good processing properties such as injection, extrusion, calendering, blow molding, and molding. It is used in the three major shoemaking projects of soles, uppers, and fitting, and is favored by the majority of shoemakers. As can be seen from the picture below, TPU covers almost the entire range of shoe manufacturing processes.

  Material Introduction June 03, 2024
• Characteristics of Co-rotating Twin-screw Extruders And Basic Principles of Screw Combination

  For a twin-screw extruder, the screw is mainly divided into a feeding section, a melting section, a mixing section, an exhaust section and a homogenizing section. Threaded components mainly include conveying, melting, shearing, material mixing, residence time control and other functions. The threaded elements of the twin-screw extruder are combined in a "building block" manner. In practice, they can be adjusted according to different production needs. Therefore, screw combination is the key to customizing the twin-screw extrusion process.

  Machine Test Running May 30, 2024