Product News

• PE + 85% Caco3 High Filling Masterbatch Air Cooling Granulating Line

  Pre mix the raw material with high speed mixer machine.

  Machine Test Running November 05, 2018
• The difference between modified plastics and unmodified plastics

  In fact, any plastic raw material has at least a certain proportion of stabilizers when it leaves the factory to prevent it from degrading in storage, transportation and processing. Therefore, strictly speaking, "unmodified plastics" do not exist. In industry, basic resins produced by chemical plants are commonly called "unmodified plastics" or "pure resins".

  Material Introduction October 31, 2018
• TSE-95D Twin Screw Extruder in Water Strand Pelletizing Line

  Here is the TSE-95D (TSH-95B) twin screw extruder.The gearbox is D type, which is better than the B type.Some photos of the machine test running in water strand pelletizing line.

  Products Release October 24, 2018
• Intergral Bath + Blower + Pelletizer for Water Strand Extrusion Line

  The integral water bath + blower + pelletizer is special designed for lab scale extruder machine.It's easier for customer to install the extrusion line.

  Products Release October 22, 2018
• PP Functional Modification

  PP Functional Modification

  Material Introduction October 15, 2018
• PP Blending modification

  Blending modification refers to the blending of other plastics, rubber, or thermoplastic elastomers with PP and filling them into larger crystal spheres in PP to improve the toughness and low temperature brittleness of PP.

  Material Introduction October 12, 2018
• Knowledge of PP Modification-Filling Modification

  PP is a common plastic raw material and one of the commonly used modified raw materials. The modification methods can be divided into four kinds: filling modification, strengthening and toughening modification, blending modification and functional modification.

  Material Introduction October 10, 2018
• Application of Polypropylene Foaming Materials

  Foamed PP has a broad development prospects.

  Material Introduction October 08, 2018
• Introduction of Polypropylene Foaming Materials

  Foamed plastics are widely used in various fields of daily life and industry due to their low density, good impact load absorption, good insulation, sound insulation and high specific strength.

  Material Introduction October 05, 2018
• Acrylic Elastomer Market Will Increase 8.7% Annually

  The market for acrylic elastomers will grow from $648.2 million in 2017 to $983.9 million in 2022, with an annual composite growth rate of 8.7 percent, according to the latest forecast by Markets and Markets, a leading U.S. market research firm.

  Material Introduction October 03, 2018