PP Long Glass Fiber Reinforced Plastic Features and Application

Publish Time: 2017-10-25     Origin: Site

At present, LFT-PP (long fiber reinforced PP) has been widely used in automobiles, electric tools, home appliances, water treatment components. However, each field has different requirements for lft-pp. Here we briefly introduce the following 8 kinds of lft-pp:


LFT-PP—Ordinary Grade

This kind of lft-pp reinforced material is mainly made of long glass fiber material, without other auxiliary agent. The content of long glass fiber is generally 20-60%; thermal deformation temperature is above 147 ℃ (the higher the content of long glass fiber, the higher the thermal deformation temperature is, resistance to low-temperature impact strength is higher).

Main features: Chemical coupling, high strength, reference short cut length 8mm, 11mm, 20mm;

Application Products: Auto parts, washing machine parts, water pump parts, water treatment parts, home furnishing and so on.


LFT-PP—Heat resistant grade

This kind of lft-pp long glass fiber content is generally in 20-50%, the thermal deformation temperature is above 152 ℃ (The higher the content of long glass fiber, the higher the thermal deformation temperature is).

Main features: High strength, long-term heat-resistant aging resistance (150℃x1000h, 140℃x1000h), reference short cut length 8mm, 11mm, 20mm;

Application Products: automobile front and rear end module, battery bracket, engine cover shell, water tank frame, skylight frame, etc.

 

LFT-PP—UV Resistance

The long glass fiber content of UV-resistant lft-pp is general in 20-50%, thermal deformation temperature is above 152 ℃.

Main features: High-strength, UV-resistant, long-term heat-resistant aging performance, good product appearance, reference short cut length 8mm, 11mm, 20mm;

Application Products: Car (truck) door handle, rearview mirror system, battery shell, truck (SUV) external pedal and so on.


LFT-PP—hot water resistant grade

Long glass fibre content of long-term hot water resistant lft-pp is generally 15% and 20%, and the thermal deformation temperature is over 146 ℃.

Main features: High strength, good hot water-resistant, good detergent performance, long-term heat-resistant oxygen aging performance, reference short cut length 8mm, 10mm, 12mm;

Application products: Washing machine parts, dryer parts and so on.


LFT-PP—low odor, low TVOC

TVOC is the abbreviation of total volatile organic compounds, under more stringent vehicle air management requirements, low odor and low TVOC lft-pp has a great advantage in the automotive interior .

Main features: High strength, low odor, low TVOC, reference short cut length 8mm, 10mm, 12mm;

Application Products: Automobile instrument panel (IP) skeleton, inner door panel, Central control panel bracket, glove box cover plate, airbag bracket, rear board, etc.

 

LFT-PP——ultra low warpage

PP is easy to warp after adding glass fiber, when the product with high dimensional requirement is injected, ultra low warpage LFT-PP can be considered.

Main features: Ultra-low warping, high-strength, reference short cut length 8mm, 10mm, 20mm;

Application Products: Automobile inner door panel, glove box cover plate, air-conditioning fan, and other products requiring dimensional stability.


LFT-PP—Halogen-Free flame retardant

Long glass fiber content of halogen-free flame retardant lft-pp is generally 20% and 30%, mainly used in products that contacting with electricity and flame.

Main features: High strength, halogen-free flame retardant, high gwit, high CTI, reference short cut length 8mm, 10mm, 12mm;

Application Products: wire casing, coil skeleton, building materials electrical sockets, public seats and so on.


LFT-PP—Super Toughness Grade

Super-toughness grade lft-pp long glass fiber content is generally 20% and 30%, mainly designed for the product of large vibration and susceptible to stress impact.

Main features: ultra-high impact strength (under normal temperature and low humidity), reference short cut length 8mm, 10mm, 12mm;

Application Products: Electric tools, pump housing, pipe fittings and so on.

Haisi extrusion supply special design twin screw extruder machine for glass fibre reinforced material making, including PP+ long glass fibre, PP+ short glass fibre, TPU + glass fiber, PA/nylon +glass fiber...

Any interest please contact us.


What Types of Plastics Are There?

A Brief Introduction To The Production Process of Modified Plastics

What Is The Difference between PET And PE?

Regarding The Production of Calcium Carbonate Filler Masterbatch, These Five Points May Be Worth Looking at

A Complete List of Plastic Raw Material Terms——No Longer Worried about Not Being Able To Understand The Physical Properties Table